The washer stops halfway through a cycle with the drum still full of water. Or you open the fridge in the morning and the milk is lukewarm, even though the light inside comes on as usual. These faults arrive without warning, usually at the worst moment. The good news is that many of them have a specific cause an appliance repair technician can trace: a clogged drain pump, a failed sensor, a control board that needs repair. A breakdown doesn't automatically mean the whole machine is finished.
Appliance repair, machine by machine
- Washing machine: won't drain or spin, leaks from underneath, or bangs around loudly on the spin cycle.
- Fridge and freezer: running but not cooling, ice building up on the back wall, water under the crisper drawer, or a door seal that no longer closes tight.
- Gas stove and oven: weak burners that keep going out, an igniter that won't spark, or an oven that heats unevenly. If you smell gas, close the valve and open the windows before anything else.
- Water heater: lukewarm water, cutting out every so often, crackling noises, or a drip from underneath.
- Microwave: the light is on and the plate turns, but the food comes out cold, or there are sparks inside.
- Dishwasher: water left standing at the bottom, dishes coming out dirty, or an error code on the display.
- Dryers, chest freezers and water dispensers too, always starting from the symptom you've noticed.
Have these details ready before you order
- The brand and model, usually printed on a sticker inside the washer door or on the inner side wall of the fridge.
- Any error code on the display, such as a letter next to a number. Photograph it exactly as it appears.
- When it last worked properly, and what happened just before it stopped: a power cut, a move, or a deep clean.
- Roughly how old the machine is, and whether it's been repaired before and what was replaced.
- A photo or short video of the fault itself: the strange noise, the leak, or the warning light.
- Where the appliance sits and how easy it is to reach, especially if it's built into the kitchen units.
Repair or replace: an honest take
Not every fault is worth fixing. If the machine is old and has already been repaired several times this year, or the fault is in the compressor or main motor and the part costs close to a new appliance, that money is usually better spent on a replacement. The reverse holds too. A fairly new machine that stopped because of a sensor, a seal or a pump is usually far cheaper to repair.
The technician gives you an opinion after the inspection, and the price is right there in the app. If you decide a repair isn't worth it and decline, the visit fee is the only charge, and you'll know exactly where the machine stands before you buy another.
Send the brand and a photo of the error code in an order from the Aman Fix app, so the technician arrives knowing what to expect.
Get the app
